Application
Premium Glow can be used on all smooth vinyls, linoleum, PVC, rubber, sealed cork, sealed wood fl oors, terrazzo, marble and stone.
N.B. not suitable for unsealed wood, unsealed cork and laminate flooring.
Directions for Use
To obtain best results, it is important that thorough preparation of the floor is undertaken. The floor must be thoroughly cleaned to remove dirt, grease and old polish films by using a quality polish remover. The floor must be well rinsed with water to remove any alkaline residue and allowed to dry before applying polish.
Apply a thin coat of Premium Glow to the clean, dry neutral floor surface using a mop or polish applicator. Allow approximately 30 minutes drying time between each coat. The gloss and durability will be increased by additional coats of Premium Glow. To enhance the performance use a floor maintainer. Premium Glow is resistant to most detergents, but can be removed by using a stripping solution.